Andrii Bondarenko

Date of birth:
26th February 1973 (Orikhiv, Zaporizhzhya region)

Work experience

Professor of Department of engineering and design in machinery industry;

Head of the Technological department of the Mining Enterprises Design Institute at Dnipro University of Technology

Member of the specialized scientific councils at Dnipro University of Technology on the defense of theses in the specialties: 05.05.06 - mining machines, 05.15.03 - open mining of minerals, 05.15.08 - enrichment of minerals, 21.06.01 - environmental safety

Guarantor of the educational and scientific program of PhD degree in the specialty 133 Mechanical Engineering;

Member of Scientific and Methodological Commission of Dnipro University of Technology in specialty 133 "Branch Mechanical Engineering"

Member of the Scientific Council of Dnipro University of Technology in the specialty "Mechanics"

Special skills

Certified Design Engineer (International Certificate Design and Projecting Engineer)

Head of Planning and Design Office "Hydraulic Technology of Mining"

Member of the Scientific Council of the Ministry of Education and Science of Ukraine in the specialty "Mechanical Engineering"

Expert of the Expert Council of the Ministry of Education and Science of Ukraine on issues of scientific personnel attestation in production and technologies since 12.2022.

Expert of the "Mechanical Engineering" section for the examination of scientific research projects and scientific and technical (experimental) developments since 12.2022.

Member of the all-Ukrainian public organization "Guild of designers in construction"

Member of the editorial board of the journal "Collection of research papers of the National Mining University"

Member of the Technical Committee of the International Conference on

Materials Science, Energy Technology and Environmental Engineering (MSETEE)

Member of the Editorial Board of the Scientific Journal of Metinvest

Polytechnic. Series: Technical sciences (Mechanical engineering)

Address: 49005, Ukraine, Dnipro, av. Dmitry Yavornitsky, 19, office 10/606

Phone number: office +38 056 756-09-73

Е-mail: Bondarenko.a.o@nmu.one

Education

State Mining Academy of Ukraine (Dnipro) (1990-1995)

Qualification – mining mechanical engineer (honors degree)

Postgraduate study State Mining Academy of Ukraine, Department of Mining Machines (1995-1998)

Science degree

Candidate of Technical Sciences Ph.D (Tech.) in specialty 05.05.06 – mining machines (2000)
Thesis topic: Substantiation of the rational parameters of the installation for underwater mining of alluvial minerals
Specialized Academic Council of the National Mining Academy of Ukraine (2000)

Doctor of Engineering Sciences D.Sc. (Tech.) on specialty Mining machines (2015)
Thesis topic: Scientific substantiation of the parameters of complexes of a new technical level for hydromechanized mining and processing of granular minerals
Specialized Academic Council of the National Mining University (2015)

Academic status: Associate Professor of the Department of Mining Machines (2004)

State and industry awards and honors

Chest badge "For service to the community";

Medal of the "Terpigoriev O.M.";

Medal of the " Dinnik O.M.";

Medal "For University Commitment";

Honorary diplomas, certificates and thanks

Field of Professional and Scientific Interests

A full range of R&D, planning and design work in directions:

engineering in mining, transportation and processing of minerals and industrial waste;

development of working drafts of mining enterprises;

development technologies of mining of minerals sedimentary and technogenic deposits by open and underwater methods;

design of complexes for processing and enrichment of minerals;

design of complexes for granular materials washing;

design of circulating water supply systems for mining enterprises

Advanced training

M.C. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine (IGTM NASU), certificate on the results of the internship № 1-282, 19.04.2021. (6 ECTS).

All-Ukrainian public organization "Guild of designers in construction" Certificate of professional development of a Design Engineer № 00860 03.04.2020.

Seminar «Development and implementation of integrated management systems based on risk management in accordance with standards ISO 9001, ISO 14001, ISO 50001, ISO 39001, ISO 45001» (Dnipro, 04.03.2021.).

Seminar «Institutional culture of academic integrity: national experience and best practices of the European Union». Certificate № 101048055-25-091. (0,2 ECTS), 25.05.2022.

Seminar «Academic integrity as a driving force for improving the quality of higher education: cases of accreditation examination». Certificate № 101048055-14-053. (0,5 ECTS), 14-16.06.2022.

Center for professional development of personnel of the Dnipro University of Technology. Online training «Accreditation of educational programs from A to Z: practical cases». Certificate № ЗКЦПР02070743-010-013. (1 ECTS), 17-24.11.2022.

Training «Innovative development of universities: The role of R&D and cooperation with business». Certificate № 227. (1 ECTS). 09.10.2023 – 16.11.2023.

Center for professional development of personnel of the Dnipro University of Technology. Online training «Artificial Intelligence: Technical and Legal Aspects of Academic Integrity». Certificate № ЗКЦПР02070743-022-084. (0,27 ECTS).06.03.2024.

Center for professional development of personnel of the Dnipro University of Technology. Training «Critical Mineral Raw Materials. Experience of Implementing EU Leading Practices in Ukraine». Certificate № ЗКЦПР02020743-032-010. (1 ECTS). 30.10.2024 – 04.11.2024.

      

Foreign internship

Technical University of Dresden. Professional Development Online Training Course “Digital Teaching” 18.10.2022 – 14.12.2022. Certificate №DT2022001. (3 ECTS).

Professional Development Online Training Course “Digital Research” 11.10.2024 – 10.12.2024. Сертифікат № DR2024238. (4 ECTS).

International scientific cooperation

Overseas Research Supervisor of PhD candidate Assel Nurmanova, Satbayev University, Kazakhstan since 03.2022

Publications

http://orcid.org/0000-0002-7666-6752

Scopus Author ID: 55341267800

ResearcherID: C-9856-2019

https://scholar.google.com.ua/citations

(over 237), including major ones over the last 5 years:

1. Bondarenko А.O., Ostapchuk O.V. (2020) Design and implementation of a jet pump dredge. Topical scientific researches into resource-saving technologies of mineral mining and processing . Multi-authored monograph. – Sofia: Publishing house “St. Ivan Rilski”, 2020. – 296 – 304.

2. Bondarenko A.O. Substantiation of the parameters of the erosion jet underwater face / A.O. Bondarenko, O.O. Shustov // Збірник наукових праць НГУ. – 2020, № 60-04. – С. 38 – 48. https://doi.org/10.33271/crpnmu/60.038.

3. Bondarenko, A. O., Malіarenko, P.О., Zapara, Ievgen, Bliskun, S.P. 2020. Testing of the complex for gravitational washing of sand. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (5), 26-32. https://doi.org/10.33271/nvngu/2020-5/026.

4. Bondarenko, A.O., Jamil Haddad, O.O. Tytov, Fadi Alfaqs. 2021. Complex for Processing of Rubble Wastes of Stone Dressing. International Review of Mechanical Engineering (I.RE.M.E.), Vol. 15, N. 1, 44-50. https://doi.org/10.15866/ireme.v15i1.20205.

5. Oleksandr Shustov, Artem Pavlychenko, Andrii Bondarenko, Oleksandr Bielov, Olena Borysovska, Arstanbek Abdiev (2021). Substantiation into Parameters of Carbon Fuel Production Technology from Brown Coal, Actual Challenges in Materials Science and Processing Technologies II, Trans Tech Publications Ltd, Switzerland Vol. 1045, pp 90-101. https://www.scientific.net/book/actual-challenges-in-materials-science-and-processing-technologies-i....

6. Технологія екологобезпечної відкритої розробки нерудних родовищ твердих корисних копалин: Монографія. Симоненко В.І., Павличенко А.В., Анісімов О.О., Бондаренко А.О., Черняєв О.В., Гриценко Л.С. Дніпро: Журфонд, 2022. – 365 с.

7. Bondarenko А.О. Introduction of a jet pump dredger equipped with an innovative suction head / Збірник наукових праць НГУ. – 2022, № 70-10. – С. 107 – 117. https://doi.org/10.33271/crpnmu/70.107.

8. Bondarenko, A., Shustov, O., & Adamchuk, A. (2023). Studying the interaction process of a solid particle flow with the hydraulic classifier flowing part. IOP Conference Series: Earth and Environmental Science, 1254(1), 012047. https://doi.org/10.1088/1755-1315/1254/1/012047

9. Bondarenko A.O., Shustov O.O., Pavlychenko, A.V., Adamchuk A.A. (2023). Substantiation of technological resource-saving conditions for the use of equipment in the sand deposit mining. IOP Conference Series: Earth and Environmental Science, Vol. 1269(1), 012024. https://iopscience.iop.org/article/10.1088/1755-1315/1269/1/012024.

10. Adamchuk, A., Pavlychenko, A., Shustov, O., & Bondarenko, A. (2024). Research of land-saving schemes of mining the horizontal sedimentary mineral deposits. IOP Conference Series: Earth and Environmental Science, 1319(1), 012012. https://doi.org/10.1088/1755-1315/1319/1/012012.

11. Bondarenko A., Kukhar V., Nurmanova A. (2024). Substantiating the Jet Agitator Parameters for Dredgers. Proceedings of International Conference on Applied Innovation in IT, 12 (1) , pp. 271-278.

12. Andrii Bondarenko, Viktor Kukhar and Assel Nurmanova (2024). Innovative technology and equipment for stone processing sludge recycling. IOP Conference Series: Earth and Environmental Science, 1348, 012037. DOI 10.1088/1755-1315/1348/1/012037.

13. Kukhar, V., & Bondarenko, A. (2024). The concept of teaching mechanical engineering students to prepare design documents in accordance with national and international standards. ScienceRise: Pedagogical Education, 1 (58), 87–93. https://doi.org/10.15587/2519-4984.2024.299501

Patents

The method of processing granular materials / А.О. Бондаренко // Патент на винахід № 116961 Опубл. 12.06.2017. Бюл. № 11.

Sludge processing method / А.О. Бондаренко, В.В. Шах // Патент на винахід № 137449 Опубл. 25.10.2019, Бюл. №20.

Educational-methodical works

(over 30), including major ones over the last 5 years:

1. Бондаренко А.О. Інжиніринг гірничих машин та комплексів для підводного видобутку корисних копалин : навчальний посібник / А.О.Бондаренко ; Нац. техн. ун-т. «Дніпровська політехніка». – Д. : НТУ «ДП», 2021. – 96 с.

2. Бондаренко А.О. Методи дослідження процесів гідравлічного видобутку й переробки мінералів : конспект лекцій / А.О.Бондаренко ; Нац. техн. ун-т. «Дніпровська політехніка». – Д. : НТУ «ДП», 2022. – 41 с.

3. Бондаренко А.О. Планування дослідних випробувань устаткування та обробка результатів : конспект лекцій / А.О.Бондаренко ; Нац. техн. ун-т. «Дніпровська політехніка». – Д. : НТУ «ДП», 2022. – 43 с.

4. Освітньо-наукові програми вищої освіти для доктора філософії спеціальності 133 галузеве машинобудування, 2017-2025.

5. Навчальні плани підготовки доктора філософії спеціальності 133 галузеве машинобудування на 2019-2025 р.

6. Програми вступного фахового іспиту в аспірантуру спеціальності «133 – галузеве машинобудування» на 2017-25р.

7. Екзаменаційні матеріали вступного фахового іспиту в аспірантуру спеціальності «133 – галузеве машинобудування» на 2017-25р.

Lecturer on subjects:

Hydraulic and hydropneumatic drive engineering	Bachelor's degree
Production machines and complexes
Technological conditions for use of mechanical engineering products
Ensuring the quality of design documentation
Engineering of mining machines and complexes for underwater mining	masters degree
Analysis and synthesis of production systems
Planning experimental tests of the equipment and processing the results	PhD degree
Research methods of processes of hydraulic mining and processing of minerals